– 14 –
Selecting the Sources and Starting Play
To select the tuner as the source, press FM/AM.
When the unit is in standby mode:
The unit automatically turns on, and the unit starts to tune
into the last received station.
When the unit is turned on:
“FM” or “AM” appears in the main display for a while, and
the unit starts to tune in the last received station.
• Each time you press the button, the band alternates
between “FM” or “AM” (MW/LW).
• For more detailed operations, see pages 16 to 22.
To select the CD player as the source, press CD
3
/
8
.
When the unit is in standby mode:
The unit automatically turns on.
When the unit is turned on:
“CD PLAY” appears in the main display for a while.
• Playback will start if a CD is on the CD tray.
• “CD NO DISC” will appear in the main display if a CD
is not loaded.
To stop playback, press
7
.
• For more detailed operations, see pages 23 to 26.
To select the MD player as the source, press MD
3
/
8
.
When the unit is in standby mode:
The unit automatically turns on.
When the unit is turned on:
“MD PLAY” appears in the main display for a while.
• Playback will start if an MD is in the MD loading slot.
• “MD NO DISC” will appear in the main display if an
MD is not loaded.
To stop playback, press
7
.
• For more detailed operations, see pages 27 to 32.
USB
LINE
DIGITAL IN
Ex. When the sampling frequency is 44.1 kHz
To select the external equipment as the source, press
USB/LINE.
The unit automatically turns on (when the unit is in
standby), and the source name selected previously appears
in the main display.
• Each time you press the button (while the unit is on), the
source changes as follows:
USB
: To use PC connected to the USB AUDIO
terminal.
LINE
: To use the equipment connected to the
LINE IN jacks.
The recording level appears for a while.
(See page 41 for the recording level.)
DIGITAL IN : To use the digital equipment connected
to the OPTICAL DIGITAL IN terminal.
• If you have changed the source name, the changed name
will appear. (See page 36.)
• For details on USB, see pages 33 to 36.
• For operating the external equipment, see the manuals
supplied with them.
While selecting the digital equipment (“DIGITAL
IN”) as the source
The sampling frequency of the connected digital equipment is
shown in the main display. (If no equipment is connected to the
OPTICAL DIGITAL IN terminal or the equipment is not
connected appropriately, “UNLOCK” appears.)
Adjusting the Volume
You can adjust the volume level only while the unit is
turned on.
To decrease the volume, press VOLUME – .
To increase the volume, press .
• You can adjust the volume within the range of 0 to 50.
• When you press and hold the button, the volume level
changes continuously.
Continued
EN10-15_CA-NXMD1R[B]f.pm6
01.8.22, 11:01
14
