– 27 –
English
Using Sleep Timer
With Sleep Timer, you can fall asleep to music.
You can set Sleep Timer when the unit is turned on.
How Sleep Timer actually works
The unit automatically turns off after the specified time
length passes.
On the remote control ONLY:
1
Press SLEEP.
The time length until the shut-off time appears
and the SLEEP indicator starts flashing on the
display.
• Each time you press the button, the time length changes
as follows:
2
Wait for about 5 seconds after specifying the
time length.
The SLEEP indicator stops flashing and remains lit.
To check the remaining time until the shut-off time, press
SLEEP once so that the remaining time until the shut-off time
appears for about 5 seconds.
To change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.
To cancel the setting, press SLEEP repeatedly until “OFF”
appears on the display so that the SLEEP indicator goes off
from the display.
• Sleep Timer is also canceled when you turn off the unit.
Timer Priority
Since each timer can be set separately, you may wonder what
happens if the setting for these timers overlaps.
Here are examples.
• Recording Timer has priority over Daily Timer.
If Daily Timer is set to come on while Recording Timer is
operating, Daily Timer will not come on at all.
• If Sleep Timer overlaps with another timer (either Daily
Timer or Recording Timer), a timer with the earlier shut-off
time has priority.
When using the Recording Timer and Sleep Timer at the
same time, pay special attention to the shut-off time.
4
Set the on-time you want the
unit to turn on.
1) Press
4
or
¢
to set the hour,
then press SET.
2) Press
4
or
¢
to set the
minute, then press SET.
“OFF TIME” appears for 2 seconds, then
the unit enters off-time setting mode.
5
Set the off-time you want the
unit to turn off (on standby).
1) Press
4
or
¢
to set the hour,
then press SET.
2) Press
4
or
¢
to set the
minute, then press SET.
The unit enters preset station selecting
mode.
6
Select the preset station.
1) Press
4
or
¢
to select the
band (“TUNER FM” or “TUNER
AM”), then press SET.
2) Press
4
or
¢
to select a
preset channel number, then press SET.
The REC (recording timer) indicator stops
flashing and remains lit. The settings you
have done are shown on the display in
sequence for your confirmation.
7
Press
STANDBY/ON to
turn off the unit (on standby) if
necessary.
If you want to listen to another source while recording
Press REC START/STOP or
7
to stop recording. Without stopping
it, you cannot change the source.
To turn on or off Recording Timer after its setting is
done
1
Press CLOCK/TIMER repeatedly until
“REC” appears on the display.
2
To turn off the Recording Timer, press
CANCEL.
The REC (recording timer) indicator goes off
from the display (“OFF” appears for a while).
The Recording Timer is canceled, but the
setting for the Recording Timer remains in memory.
To turn on the Recording Timer, press SET.
The REC (recording timer) indicator lights up
on the display. The settings you have done are
shown on the display in sequence for your
confirmation.
SLEEP10
OFF
(Canceled)
SLEEP20
SLEEP30
SLEEP60
SLEEP90
SLEEP120
PRESET
NEXT
PREV
SET
SET
PRESET
NEXT
PREV
SET
CLOCK
/ TIMER
CANCEL
/DEMO
SET
SLEEP
STANDBY/ON
STANDBY
PRESET
NEXT
PREV
Recording Timer
7:00
6:30
Sleep Timer
7:30
6:00
canceled.
Recording Timer
6:00
7:30
7:00
6:30
Daily Timer
does not work.
EN21-30.MX-K55V[US,UX]_1
01.6.6, 5:02 PM
27
