background image

– 20 –

English

Using the Timers

There are three timers available — Recording Timer, Daily
Timer, and Sleep Timer.

Before using the timers, you need to set the clock built in the
unit. (See page 9.)

Using Daily Timer

With Daily Timer, you can wake to your favorite music or
radio program.

How Daily Timer actually works

The unit automatically turns on, set the volume level to the
preset level, and starts playing the specified source when the
on-time comes (the 

 indicator flashes just before the on-

time, and continues flashing while the timer is operating).
Then, when the off-time comes (“OFF” flashes just before the
off-time), the unit automatically turns off (stands by).
The timer setting remains in memory until you change it.
• There is a time limit in doing the following steps. If the

setting is canceled before you finish, start from step 1
again.

• If you have made a mistake while setting timer, press

CANCEL. (However, this does not always work. If
CANCEL does not work, press TIMER/CLOCK repeatedly
and start from step 1 again.)

On the unit ONLY:

1

Press TIMER/CLOCK until
“DAILY” appears on the display.

The DAILY indicator also starts flashing on the display.
• Each time you press the button, the timer setting modes

change as follows:

2

Press TIMER/CLOCK again.

“ON TIME” appears for 2 seconds, then the unit
enters on-time setting mode.

PRESET

PRESET

PRESET

DAILY

Canceled

ON TIME

ON TIME

Clock

setting

(See page 9.)

REC

TIMER
/CLOCK

TIMER
/CLOCK

– CD – – –

TUNER FM

TUNER AM

TAPE

AUX

3

Set the on-time you want the unit
to turn on.

1) Press 

4

 or 

¢

 to set the hour, then

press SET.

2) Press 

4

 or 

¢

 to set the minute, then press

SET.
“OFF TIME” appears for 2 seconds, then
the unit enters off-time setting mode.

4

Set the off-time you want the unit
to turn off (on standby).

1) Press 

4

 or 

¢

 to set the hour, then

press SET.

2) Press 

4

 or 

¢

 to set the minute, then press

SET.
The unit enters source selecting mode.

5

Press 

4

 or 

¢

 to select the

source to play, then press SET.

• Each time you press 

4

 or 

¢

, the

source changes as follows:

TUNER FM

: tunes into a specified preset FM

station. 

=

 go to step 6.

TUNER AM

: tunes into a specified preset AM (MW/LW)

station. 

=

 go to step 6.

– CD – – –

: plays a disc from a specified track of a

specified disc. 

=

 go to step 6.

• Make sure there is a CD on the selected disc

number tray.

TAPE

: plays a tape in deck A or B. 

=

 go to step 7.

• Make sure that a tape is in the deck whose deck

indicator (A or B) is lit on the display.

• Make sure that the tape direction is correct.

AUX

: plays an external source.

=

 go to step 7.

• To use this setting, the external component has to

be equipped with the timer function.

Continued

 DAILY

ST

S.MODE

DAILY

ST

S.MODE

DAILY

ST

S.MODE

SET

SET

SET

 DAILY

ST

S.MODE

EN18-24.CA-MXJ30/330/35R[E]/f

99.2.19, 4:59 PM

20

Summary of Contents for CA-MXJ30































Reviews: