background image

– 8 –

English

When connecting the AC power cord into a wall outlet, the
unit automatically starts display demonstration.

To stop the display demonstration, press any button on the
unit or the remote control.

To start the display demonstration manually

Press and hold DEMO for more than 2
seconds.

To stop the demonstration, press any button.

CANCEL

DEMO

Connecting Other Equipment

You can connect an audio equipment — used only as a
playback device.
When you connect and use this equipment, refer also to its
manual.

Be sure that the plugs of the audio cords are color coded:
White plugs and jacks are for left audio signals, and red ones
for right audio signals.

• DO NOT connect any equipment while the power

is on.

• DO NOT plug in any equipment until all

connections are complete.

NOW, you can plug in the unit and other
connected equipment FINALLY!

ANTENNA

AUX

GND

AM EXT

RIGHT

LEFT

FM
COAXIAL

AM LOOP

75    

SPEAKERS

RIGHT

LEFT

To connect audio equipment

Connect the audio output jacks on the other equipment and
the AUX jacks on the rear, using an audio cord (not supplied).

To audio output

Audio equipment

To a wall outlet

AUX

RIGHT

LEFT

SPEAKERS

RIGHT

LEFT

ANTENNA

GND

AM EXT

FM
COAXIAL

AM LOOP

75    

EN01-13.CA-MXJ30/330/35R[E]/f

99.2.19, 4:55 PM

8

Summary of Contents for CA-MXJ30































Reviews: