MX-G71R
1-11
Prior to performing the following procedure, remove
the metal cover, the CD changer mechanism
assembly and the rear panel.
Remove the two tie band attaching the wire to the
voltage board.
Disconnect the wires from connector CN703, CN704
and CN706 on the amplifier board respectively.
Disconnect connector CN215 on the amplifier board
and CN216 on the voltage board from the regulator
board (The heat sink and heat sink bracket will be
detached at once).
Remove the four screws I attaching the amplifier
board to the heat sink.
Remove the two screws J, the board bracket and
the voltage board.
1.
2.
3.
4.
5.
Removing the amplifier board / voltage
board / heat sink (See Fig.19 to 21)
Prior to performing the following procedure, remove
the metal cover, the CD changer mechanism
assembly and the rear panel.
Disconnect the wire from connector CN250 on the
power supply board.
Move the power cord stopper upward and pull out it
from the base chassis.
Disconnect the wire from connector CN218 on the
power supply board.
Remove the power supply board from connector
CN213 on the r
egulator board.
1.
2.
3.
4.
Removing the power cord / power supply
board (See Fig.19)
Fig.19
Fig.20
Amplifier board
CN704
CN706
CN216
Regulator board
CN215
Tie band
CN703
Voltage board
Amplifier board
Heat sink
Voltage
board
I
I
J
Voltage board
Fig.21
CN218
Power supply
board
CN250
Power cord
stopper
Base chassis
Power
cord
CN213
Board bracket
Tie band
Tie band
Summary of Contents for CA-MXG71R
Page 45: ...MX G71R 1 45 M E M O ...
Page 61: ...MX G71R 3 2 M E M O ...