background image

 

12

 

Playing Back from the PC

 

This System is equipped with a USB terminal on the front 
panel. You can connect your PC to this terminal and enjoy 
sound reproduced through your PC. 
When you connect your PC for the first time, follow the 
procedure below.
• Remember you cannot send any signal or data to your PC 

from this System.

 

How to install the USB drivers

 

The following procedure is described using the English 
version of Windows

R

 

XP. If your PC is running on a 

different version of Windows, the screens shown on your 
PC’s monitor will differ from the ones used in the following 
procedure.

 

1

 

Turn on your PC and start running Windows

R

 

 98SE, 

Windows

R

 

 Me, Windows

R

 

 2000 or Windows

R

 

 XP.

 

• If the PC has been turned on, quit all the applications 

now running.

 

2

 

Turn on the System and select USB for the source.

 

3

 

Connect the unit to the PC using a USB cable (not 
supplied).

 

• Use “USB series A plug to B plug” cable when 

connecting.

 

4

 

The USB drivers are installed automatically.

 

• If the USB drivers are not installed automatically, 

install the USB drivers following the instructions on the 
PC’s monitor.

 

5

 

Check if the drivers are correctly installed.

 

1

Open the Control Panel on your PC: Select [Start] 

=

 

 

[Settings] 

=

 

 [Control Panel]

2

Click [System] 

=

 

 [Hardware] 

=

 

 [Device Manager] 

=

 

 [Sound, video and game controllers] and 

[Universal Serial Bus controllers]

• The following window appears, and you can check 

whether the drivers are installed.

* The installed drivers can be shown only when the System is 

connected to the PC.

 

To play back sounds on the PC

 

Refer to the manuals supplied with the sound reproduction 
application installed in the PC.
• Noise and static electricity may stop the sound through the 

USB connection. In this case, do the following operations: 
– Disconnect and connect the USB cable again.
– Restart the music software on your PC.
– Turn off and on the System.

• Microsoft

 

®

 

, Windows

 

®

 

 98SE, Windows

 

®

 

 Me, Windows

 

®

 

 

2000 and Windows

 

®

 

 XP are registered trademarks of 

Microsoft corporation.

 

IMPORTANT

 

• Always set volume to VOL MIN when connecting or 

disconnecting the other equipment.

DO NOT turn off the System and disconnect 
the USB cable while installing drivers and 
playing back, and for several seconds after 
your PC recognizes the System.

AUX

USB

USB cable

PC

(front panel)

HX-C6[J]-f.book Page 12 Monday, March 7, 2005 3:28 PM

Summary of Contents for CA-HXC6





























Reviews: