JVC CA-FSY1, Service Manual

Page: 8 / 64

1-8 (No.MB376)
3.1.3 Removing the front panel assembly
(See Figs.7 to 9)
• Remove the side panels L/R and top panel assembly.
(1) From the bottom side of the main body, remove the two
screws H attaching the front panel assembly. (See Fig.7.)
(2) From the forward side of the micom board, disconnect the
card wire from the connector CN426 . (See Fig.8.)
(3) Disconnect the wire from the connector CN501 on the mi-
com board. (See Fig.8.)
(4) From the right side of the main body, remove the screw J
and remove the earth wire. (See Fig.8.)
Reference:
• When attaching the screw J , attach the earth wire with
it. (See Fig.8.)
• After attaching the earth wire, fix it with the spacer as
before. (See Fig.8.)
(5) From the bottom and both sides of the main body, release
the joints ( d , e ) of the front panel assembly and remove the
front panel assembly in the direction of the arrow. (See
Figs.7 to 9.)
Fig.7
Fig.8
Fig.9
Front panel assembly
d
H
H
Front panel assembly
CN426
CN501
e
Micom board
Earth wire
J
Spacer
Front panel assembly
e