JVC CA-FSY1 Service Manual Download Page 14

Page: 14 / 64

1-14 (No.MB376)

3.1.9 Removing the micom board

(See Fig.23)

• Remove the side panels L/R, top panel assembly and rear

panel.

(1) From the right side of the main body, remove the screw

attaching the micom board.

Reference:

• When attaching the screw

, attach the earth wire with

it.

• After attaching the earth wire, fix it with the spacer as

before.

(2) Disconnect the card wire from the connector

CN421

on the

forward side of the micom board.

Reference:

Remove the tuner as required. (See Figs.10 and 11.)

(3) Disconnect the card wire from the connector

CN426

on the

forward side of the micom board.

(4) Disconnect the wire from the connector

CN501

on the for-

ward side of the micom board.

(5) Disconnect the connectors (

CN423

CN424

CN425

) on

the micom board from the regulator board toward this side
to remove the micom board.

Fig.23

3.1.10 Removing the regulator board

(See Fig.24)

• Remove the side panels L/R, top panel assembly, tuner, rear

panel, switching power supply, digital amplifier board assem-
bly and micom board.

(1) From the top side of the main body, disconnect the card

wires from the connectors (

CN208

CN210

) on the regula-

tor board.

Reference:

When connecting the card wire to the connector

CN208

pass it through the hole

of the regulator board as be-

fore.

(2) Remove the three screws

and take out the regulator

board.

3.1.11 Removing the video board

(See Fig.24)

• Remove the side panels L/R, top panel assembly, tuner, rear

panel, switching power supply, digital amplifier board assem-
bly and micom board.

Reference:

Remove the regulator board as required.
(1) From the top side of the main body, remove the two screws

and take out the video board in the direction of the arrow.

(2) Disconnect the card wire from the connector

CN703

on the

video board.

Fig.24

CN421

CN426

CN424

CN501

Micom board

Earth wire

Spacer

CN423

CN425

Regulator board

Video board

CN703

CN208

CN210

Summary of Contents for CA-FSY1

































































Search results

Summary of Contents for CA-FSY1

Reviews:

Related manuals for CA-FSY1

Brands by name

Popular brands

JVC CA-FSY1, Service Manual

Search results

Summary of Contents for CA-FSY1

Reviews:

Related manuals for CA-FSY1

Brands by name

Popular brands