JVC BR-HD50U - Compact HDV/DV Format Video Recorder Instruction Manual Download

Page: 15 / 92

E-11

[PLAY] button/LED

• Press this button to start playing back a

tape. During playback, the green LED lights
up.

• When recording is paused, press this but-

ton to resume recording.

[PAUSE] button/LED

• During recording, press this button to pause

it.

• In the PLAYBACK or STOP mode, press

this button to enter the STILL mode. In the
RECORDING PAUSE or STILL mode, the
green LED lights up.

• When BR-HD50 is in the STILL mode,

press this button for frame advance play-
back. (In DV mode only)

Memo

Still images or images in frame advance can be
selected with STL/F.ADV: DV of the SYSTEM [1/
2] Menu screen.

[FF] button/LED

• When BR-HD50 enters the STOP mode,

press this button to fast-forward the tape.

• When BR-HD50 is in the PLAYBACK or

STILL mode, press this button for fast-for-
ward playback. The fast forward playback
speed can be changed by pressing the
/

button

or the SEARCH–/

button (when “

” KEY FUNC. in

the SYSTEM [1/2] Menu screen is set to
VAR/RECV).
(

Page 53 “Slow playback and Search

mode”)

• During fast-forwarding or fast-forward play-

back, the LED lights up in green.

[STOP] button/LED

• Press this button to stop operation.
• When BR-HD50 is in the STANDBY-OFF

mode, press this button to enter the
STANDBY-ON mode.

• While stopped, the LED lights green.

Memo

There are two stop modes.

STANDBY-OFF: For protecting the tape and
the drum, the drum does not rotate.

STANDBY-ON: The drum rotates so that it
starts up faster after BR-HD50 moves into
another mode.

[REW] button/LED

• When BR-HD50 enters the STOP mode,

press this button to rewind the tape.

• When BR-HD50 is in the PLAYBACK or

STILL mode, press this button for reverse
playback. The rewind playback speed can
be changed by pressing the /

button

or the SEARCH–/

button

(when “

” KEY FUNC. in the SYS-

TEM [1/2] Menu screen is set to VAR/
RECV).
(

Page 53 “Slow playback and Search

mode”)

• During rewinding or rewind playback, the

LED lights up in green.

Summary of Contents for BR-HD50U - Compact HDV/DV Format Video Recorder





























































































Search results

Summary of Contents for BR-HD50U - Compact HDV/DV Format Video Recorder

Reviews:

Related manuals for BR-HD50U - Compact HDV/DV Format Video Recorder

Brands by name

Popular brands

JVC BR-HD50U - Compact HDV/DV Format Video Recorder, Instruction Manual

Search results

Summary of Contents for BR-HD50U - Compact HDV/DV Format Video Recorder

Reviews:

Related manuals for BR-HD50U - Compact HDV/DV Format Video Recorder

Brands by name

Popular brands