JVC BLU Escent DLA-VS3000G Instructions Manual Download

Page: 63 / 68

Indicator Display on the Main Unit

Meaning of the front panel indicators

The indicator appears blinking.

The indicator is solid.

Operation mode display

Displays using the different colors and solid/blinking light of the indicator on the projector unit.

LIGHT

STANDBY/ON

WARNING

LIGHT

STANDBY/ON

WARNING

LIGHT

STANDBY/ON

WARNING

LIGHT

STANDBY/ON

WARNING

TAN BY/O

D Y/O

ANDBY/O

In the Cool-down mode

“STANDBY/ON” blinking (red)

When LD block is starting up

“STANDBY/ON” lights up (green)

In standby state

“STANDBY/ON” lights up (red)

“STANDBY/ON” blinking (green)

・

* “LIGHT” indicator does not blinking

when “LED Indication” is set to “Off”.

When the video image is
temporarily hidden (HIDE is on) *

Estimated timing for laser light source replacement

Displays using the solid/blinking light of the “LIGHT” indicator.

* “LIGHT” indicator does not light up when “LED Indication” is set to “Off”.

Lights up when the “LD Current” gauge reaches 95 and above. (When the “Auto

Intensity” function is “On”.)

LIGHT

STANDBY/ON

WARNING

LIGHT

“LIGHT” lights up (orange)

Others

Summary of Contents for BLU Escent DLA-VS3000G





































































Search results

Summary of Contents for BLU Escent DLA-VS3000G

Reviews:

Related manuals for BLU Escent DLA-VS3000G

Brands by name

Popular brands

JVC BLU Escent DLA-VS3000G, Instructions Manual

Search results

Summary of Contents for BLU Escent DLA-VS3000G

Reviews:

Related manuals for BLU Escent DLA-VS3000G

Brands by name

Popular brands