JVC BLU Escent DLA-VS3000G Instructions Manual Download

Page: 43 / 68

Remote Code

For changing the remote control code.

Setting

Description

Change the remote control code from “B” to “A”.

Change the remote control code from “A” to “B”.

You need to configure the remote control according to the settings of this unit.

On the remote control unit, press the [MENU] and [BACK] buttons at the same time for three seconds or longer to

switch the code.

The backlight of the remote control blinks 3 times: change the remote control code to “A”

The backlight of the remote control blinks 2 times: change the remote control code to “B”

If the setting differs between this unit and the remote control, the “STANDBY/ON” indicator blinks in green when

receiving the remote control code.

LIGHT

STANDBY/ON

WARNING

ANDBY/O

(Green)

Hide Mode

For reducing the power consumption through suppressing the current supply for the LD block when the [HIDE] button

is pressed to hide the image temporarily.

Setting

Description

Off

Do not suppress the current supply when the [HIDE] button is pressed to hide the

image temporarily.

Suppresses the current supply when the [HIDE] button is pressed to hide the image

temporarily.

Software Update

For performing a software update.
For the latest information on the software, refer to http://www3.jvckenwood.com/english/download/.

Adjust/Set

Summary of Contents for BLU Escent DLA-VS3000G





































































Search results

Summary of Contents for BLU Escent DLA-VS3000G

Reviews:

Related manuals for BLU Escent DLA-VS3000G

Brands by name

Popular brands

JVC BLU Escent DLA-VS3000G, Instructions Manual

Search results

Summary of Contents for BLU Escent DLA-VS3000G

Reviews:

Related manuals for BLU Escent DLA-VS3000G

Brands by name

Popular brands