JVC BLU Escent DLA-VS3000G Instructions Manual Download

Page: 42 / 68

Function

Sync Out

For selecting the type of signal to output from Sync Out.

Setting

Description

Input (Positive)

Outputs a signal that is synchronized with the vertical sync signal of the input video

signal.

Input (Negative)

Outputs a signal with reversed polarity that is synchronized with the vertical sync

signal of the input video signal.

Low

Fixes the output at Low.

High

Fixes the output at High.

FEDSC

Outputs a signal that is synchronized with the polarity information included in the

FEDSC packet. Outputs a Low when there is no FEDSC packet.

Off Timer

For setting the duration before the power turns off automatically when the projector is not operated.

Setting values: “Off”, “1 Hour”, “2 Hours”, “3 Hours” and “4 Hours”

* The setting will be retained even after the Off Timer operation has completed.

Network

For specifying the settings for external control from a PC or smartphone.

Setting

Description

DHCP Client

Obtains the IP address automatically from the DHCP server inside the connected

network.

Off

For configuring the network settings manually.

IP Address

For configuring the IP address.

Subnet Mask

For configuring the subnet mask.

Default Gateway

For configuring the default gateway.

MAC Address

Displays the MAC address of the unit.

Set

Applies the network settings.

Glossary of Network Terminology

DHCP

: Abbreviation for Dynamic Host Configuration Protocol. This is a protocol for the network

to assign an IP address automatically to the connected device.

IP Address

: Numeric characters for identifying the device that is connected to the network.

Subnet Mask

: Numeric characters that define the bit count used for the network address that is a

segment of the IP address.

Default Gateway

: Server for communicating beyond the network that is divided by the subnet mask.

MAC Address

: Abbreviation for Media Access Control address. This is a number that is unique to each

network adapter. Each of the network adapters is assigned with a unique MAC address.

Adjust/Set

Summary of Contents for BLU Escent DLA-VS3000G





































































Search results

Summary of Contents for BLU Escent DLA-VS3000G

Reviews:

Related manuals for BLU Escent DLA-VS3000G

Brands by name

Popular brands

JVC BLU Escent DLA-VS3000G, Instructions Manual

Search results

Summary of Contents for BLU Escent DLA-VS3000G

Reviews:

Related manuals for BLU Escent DLA-VS3000G

Brands by name

Popular brands