35
Adjusting of Audio Recording Levels
This DVD recorder’s audio recording levels can be adjusted using two different methods, and AUDIO REC VOLUME MODE from
the RECORDER MENU (2/2) screen indicates the method to be used. In addition, it is also possible to return the audio recording
levels to their default settings (i.e., unity gain).
Note:
The AUDIO INPUT LEVEL switch on the DVD recorder’s rear panel can be used to select the reference input level for analog
audio (i.e., +4 dB or –8 dB).
Selecting the Adjustment Method
1.
Open the RECORDER MENU (2/2) screen.
To do this, select
†
button from the RECORDER MENU (1/2) screen and
press the SET button.
2.
Make the required setting using AUDIO REC VOLUME MODE
from the RECORDER MENU (2/2) screen.
BOTH
: Audio levels are adjusted while both the CH1/CH2
are maintained at the same volume.
INDEPENDENCE
: The CH1/CH2 are adjusted separately.
BACK
Y/C TERMINAL MODE
S1
THUMBNAIL FORM
NORMAL
AUDIO CHANNEL (DV)
1,2ch
†
1,2ch
AUDIO REC VOLUME MODE
BOTH
DISC IN ACTION
MENU
TITLE END
MENU
RECORDER MENU (2/2)
RECORDER MENU (2/2) screen
Adjusting the Audio Recording Levels
OPERATE
PHONES
REV
STOP
PLAY
DVD RECORDER BD-X200
FWD
PAUSE
REC
BUSY
OPEN/CLOSE
TOP
MENU
MENU
OPTION DV
Y/C LINE
SET UP
AUDIO
CH1
CH2
TITLE
DOLBY DIGITAL
LPCM MPEG
CHAPTER
SET
䡵
Return from setting screens to the normal display.
䡵
Recording levels can be adjusted in either Stop or Recording mode. Be sure to monitor the front panel’s audio level indicator as
the levels are being adjusted. Adjust the level so that the LED on the far right does not light.
Buttons used
Audio level indicator
Adjusting both channels together (BOTH)
Adjusting both channels separately (INDEPENDENCE)
䡵
To raise the recording level
䡵
To adjust the Channel 1 level
䡵
To lower the recording level
䡵
To adjust the Channel 2 level
SET
SET
SET
SET
Press the
6
button while holding the
8
or
t
button to raise the audio recording levels
for Channel 1 and Channel 2
simultaneously.
Press the
7
button while holding the
8
or
t
button to lower the audio recording levels
for Channel 1 and Channel 2
simultaneously.
Press either the
6
or
7
button while
holding the
8
button.
Pressing the
6
button raises the recording
level.
Pressing the
7
button lowers the recording
level.
Press either the
6
or
7
button while
holding the
t
button.
Pressing the
6
button raises the recording
level.
Pressing the
7
button lowers the recording
level.
Returning Audio Recording Levels to Default Settings (UNITY MODE)
䡵
Press and hold the
8
and
t
buttons simultaneously to return the audio recording levels to their default settings (i.e., unity gain).
●
Both of the audio recording levels will be fixed at the default setting.
