JVC AV28R250EK Instructions Manual Download

Page: 4 / 43

• Never obstruct the ventilation of this equipment. Doing so may cause overheating and result in

a malfunction or damage.

• Never use makeshift stands or attempt to affix legs with wood screws. When using a

manufacturer’s approved stand or legs, use only the fixtures provided and follow the
installation instructions.

• Never allow this equipment to be exposed to rain or moisture.
• Never allow anyone, especially children, to insert anything into an opening in the case. Doing

so may result in a fatal electrical shock.

• Never guess or take chances with electrical equipment of any kind. It is better to be safe than

sorry.

Caution

• The woofer unit is mounted on the TV. Always move the TV and woofer unit together when

removing the TV from the box, or when moving the woofer unit.

• If the TV is tilted during movement the woofer unit may fall. Be careful to keep the TV level

when moving it.

• Do not grip the woofer unit when moving the TV.
• Do not place objects on the woofer unit duct.

AV-32&28R25EK.fm Page 4 Wednesday, February 13, 2002 6:26 PM

Summary of Contents for AV28R250EK












































Search results

Summary of Contents for AV28R250EK

Reviews:

Related manuals for AV28R250EK

Brands by name

Popular brands

JVC AV28R250EK, Instructions Manual

Search results

Summary of Contents for AV28R250EK

Reviews:

Related manuals for AV28R250EK

Brands by name

Popular brands