38
Additional menu operations
4 Press the
6
buttons to choose
TV SPEAKER. Then press the
5
buttons to choose the TV speaker
setting
When you are connecting only
surround speakers:
Set TV SPEAKER to L/C/R.
When you are connecting both an
audio system and surround
speakers:
Set TV SPEAKER to CENTRE. All the
TV speakers act as a centre speaker.
(However, almost no sound is emitted
from the woofer.)
5 Press the
6
buttons to choose
TEST MODE. Then press the
5
buttons to choose ON
Test signals are output alternately from
each of the speakers.
To make sounds come from the
front speakers of the audio system:
Slowly turn up the amplifier volume until
the volume from the front speaker is
roughly equal to that from the TV
speakers or surround speakers.
6 Press the
5
buttons to adjust the
sound volumes of the speakers so
that you can listen to the sounds at
the same volume when you are
sitting where you would normally
sit to watch the TV
LEFT/CENTRE/RIGHT/SURROUND:
LEFT and RIGHT stands for the left and
right of the front speakers. CENTRE
refers to the centre speaker, and
SURROUND refers to surround speakers.
7 Press the
a
button to complete
the settings
The menu disappears.
• For details about listening positions,
see “Connecting speakers or an
amplifier” on page 40.
• When you use both an audio system
and the TV speakers and they are not
matched in sound quality, you can
change over the TV SPEAKER setting
to OFF to cut the TV speakers.
AV-32&28R25EK Re.fm Page 38 Thursday, March 7, 2002 10:18 PM
