JVC AV21BT70EP, AV28BT70EP, Instructions Manual

Page: 8 / 82

ENGLISH - 7 -
• Enter the Feature Menu directly, pressing the YELLOW
button.
Sleep Timer:
• As you enter the feature menu, Sleep Timer will be the first
selected option.
• Use “ ” or “ ” button to change the value of the sleep timer
between Off, 0:15, 0:30, 0:45, 1:00, 1:15, 1:30, 1:45, 2:00
hours. Your TV will get into standby mode when the period
you selected passes after you make the selection.
Child Lock:
In Feature Menu, press “ “ or “ ” button to select Child
Lock. Using “ ” or “ ” button turn Child Lock On or Off.
When Off is selected, there will be no difference in the opera-
tion of your TV. When On is selected, the TV can only be
controlled by the remote control handset. In this case, the
front panel buttons (except the Switch On/Off button) will not
work.
Installation Menu
This menu consists of Tuning, Program. (Programming) and
TV Config. (Configuration) sub-menus.
• Press “ MENU ” button, now you are in main menu. In the
main menu, select INSTALL. using “ “ or “ ” button,
then enter the Installation menu pressing “ ” or “ ” button.
or
• Enter the Installation Menu directly, pressing the BLUE but-
ton.
,167$//
781,1*
352*5$0
79&21),*
TUNING Menu
TUNING menu is used to programme a channel in a TV’s
programme number manually or to modify the current pro-
gramme number’s settings.
• In the
INSTALL menu, select TUNING . Then press “ ” or “ ”
button to enter the TUNING menu.
To programme a channel in a TV’s programme
number manually:
1. Programme will be the first selected item as you enter the
TUNING menu. Pressing “ ” or “ ” button select the pro-
gramme number where you want to the tuned channel to
be stored. (You may also type the programme number us-
ing the digit buttons.)
2. Press “ “ or “ ” button to select Band. Using “ ” or
“ ” button to select the band in which you want to search a
channel.
3. Press “ “ or “ ”button to select Search.Press “ ” or
“ ” button to start searching. (Press “ ” button to search
forward.Press “ ” button to search backwards.)
If the found channel is not the desired one, press “ ” or “ ”
button to start searching again.
To stop searching before a channel is found, press the re-
verse direction button. For example, when the TV is search-
ing forward with “ ” button, press “ ” button to stop searching.
If you know the channel number which you want to find, you
can find the channel directly.
Press “
“ or “ ” button to select Channel, then press
“ ” or “ ” button to select the channel number, or enter the
number with the digit buttons.
(Follow the step 5 to select the correct standard before you
select a channel number.)
4. If you want to name the new channel, press “ “ or
“ ” button to select Name.
Press “ ” or “ ” button to select the position and press “ “
or “ ” button to select a letter.
5. If the sound or picture is abnormal, change the standard
(broadcasting system) of new channel.
Press “ “ or “ ” button to select Standard, then press
“ ” or “ ” button to change the correct one.
The indicated channel number will be changed when you
change the standard.
B/G : C02-C73 / S01-S41 / S75-S79
L : C01-C73 / S01-S41 / S75-S77
6. If the channel reception is poor, fine-tune the channel.
Press “ “ or “ ” button to select Fine Tuning,then
press “ ” or “ ” to fine-tune the channel.
7. After the all settings are completed, store the new
channel’s setting to the programme number which you se-
lected. Press “
“ or “ ” button to select Store, then
press “ ” or “ ” to store it.
If you want to modify the current programme number’s
setting (for example, changing name, etc.) :
1. Select the programme number you want to modify the
settings while no menu appears.
2. Display the Tuning menu.
3. Follow “To programme a channel in a TV’s programme
number manually:” section and change the settings of
the current programme number.
Note:
Do not use Program item in the Tuning menu to select the
programme number. If you select the programme number
with Program item and store the settings, the selected pro-
gramme number’s current settings are cancelled.
PROGRAM. (Programming) Menu
Program. (Programming) menu is used to display the pro-
gramme names and numbers. You can use this menu to de-
lete a channel, to insert a channel and to autostore the pro-
grammes.