JVC AV-32X4 Instructions Manual Download

Page: 9 / 48

Setting up your TV

AV-32X4BA / LCT1674-001A-H / English

Pre-set Download

Download the registered data on the TV

channels from the TV to the VCR.
The Preset Download function automatically
begins when the initial setting is complete or

whenever the AUTO PROGRAM or EDIT/
MANUAL operations are performed.

• This function can be operated via VCR

operation.

When “FEATURE NOT AVAILABLE” is

displayed:

If “FEATURE NOT AVAILABLE” is

displayed, the download was not performed
correctly. Before trying to download again,
ensure the following:

• The VCR power is turned on.
• The VCR is T-V LINK compatible.
• The VCR is connected to the EXT-2

terminal.

• The SCART cable is fully wired.

Direct Rec

“What You See Is What You Record”
You can record to VCR the images that you

are currently viewing on TV by a simple
operation. For details, read the manual for
your VCR. Operate via the VCR. “VCR IS

RECORDING” is displayed.

In the following conditions, the VCR

will stop recording if the TV is turned

off, if the TV channel or input is

switched, or if the menu is displayed

on the TV:

• When recording images from an external

device connected to the TV.

• When recording a TV channel after it has

been unscrambled on a decoder.

• When recording a TV channel by using

the TV’s output because that TV channel
cannot be properly received on the VCR’s
tuner.

• When the VCR is not ready (for example,

when there is no tape inserted), “NO

RECORDING” is displayed.

• Operation via the TV is not possible.
• Generally, the VCR cannot record a TV

channel that cannot be received properly
by the VCR’s tuner, even though you can

view that TV channel on the TV.
However, some VCRs can record a TV
channel by using the TV’s output if that

channel can be viewed on the TV, even
though the TV channel cannot be received
properly by the VCR’s tuner. For details,

refer to your VCR instruction manual.

TV Auto Power On/VCR Image

View

When the VCR starts playing, the TV

automatically turns on and the images from
EXT-2 terminal are displayed on the screen.
When the VCR menu is operated, the TV

automatically turns on and the images from
EXT-2 terminal are displayed on the screen.

• This function does not operate if your

TV’s main power is turned off. Set your
TV’s main power to on (standby mode).

AV-32X4B_Eng.book Page 7 Monday, June 21, 2004 10:47 AM

Summary of Contents for AV-32X4

















































Search results

Summary of Contents for AV-32X4

Reviews:

Related manuals for AV-32X4

Brands by name

Popular brands

JVC AV-32X4, Instructions Manual

Search results

Summary of Contents for AV-32X4

Reviews:

Related manuals for AV-32X4

Brands by name

Popular brands