JVC AV-32X4 Instructions Manual Download

Page: 30 / 48

FEATURES

AV-32X4BA / LCT1674-001A-H / English

3 Press the

button

The Sub-menu of CHILD LOCK appears.

4 Press the

buttons to choose a

TV channel

Every time you press the

buttons, the

Programme number (PR) changes, and the
picture of the TV channel registered in the
Programme number (PR) is displayed on

the screen.

5 Press the blue button and set the

CHILD LOCK function.

Then press the

button

(CHILD LOCK) appears and the TV

channel is locked.

To reset the CHILD LOCK function:

Press the blue button again.

(CHILD LOCK) disappears.

To disable easy resetting of the CHILD

LOCK function, the menu disappears by
choosing the CHILD LOCK function and
pressing the

button as in the ordinary

menu operation.

To view a locked TV channel

1 Choose a Programme number (PR)

in which a TV channel locked with

the Number buttons or PR LIST

The screen changes to blue and the

(CHILD LOCK) appears. You cannot

view the TV channel.

2 Press the

(Information) button to

display “ID NO.” (ID NO. input

screen).

3 Press the Number buttons to enter

the ID number

The lock is temporarily released so you

can view the TV channel.

If you have forgotten the ID

number:

Perform step 1 of “To set the CHILD
LOCK function”. After confirming the ID

number, press the

button to exit the

menu.

• Even if you reset the lock temporarily,

it does not mean that the CHILD
LOCK function set for the TV channel

is cancelled. The next time anyone
attempts to view the TV channel, it
will be locked again.

• When you would like to cancel the

CHILD LOCK function, you must

perform the operation “To set the
CHILD LOCK function” again.

• To disable easy choosing of a

Programme number (PR) in which a
locked TV channel has been

registered, the Programme number
(PR) has been set that it cannot be
chosen by the

buttons or the

operation buttons at the TV.

• To disable easy resetting of the lock,

“ID NO.” (ID NO. input screen) is set
so that it cannot appear unless you
press the

(Information) button.

D0026-EN

CHILD LOCK

CH / CC

BBC1

LOCK

BACK

D0027-EN

ID NO . :

D0028-EN

AV-32X4B_Eng.book Page 28 Monday, June 21, 2004 10:47 AM

Summary of Contents for AV-32X4

















































Search results

Summary of Contents for AV-32X4

Reviews:

Related manuals for AV-32X4

Brands by name

Popular brands

JVC AV-32X4, Instructions Manual

Search results

Summary of Contents for AV-32X4

Reviews:

Related manuals for AV-32X4

Brands by name

Popular brands