JVC AV-29A10 Instructions Manual Download Page 29

Page: 29 / 39

AV29A10EU / LCT0984-001A-U / English

ADDITIONAL MENU OPERATIONS

■

Using the ACI function

This TV has an ACI function which decodes the ACI (auto-
matic Channel Installation) data.
Using the ACI function allows all TV channels transmitted
from the cable TV station to be properly registered quickly ac-
cording to the data from the cable TV station.

Caution:

If your cable TV station broadcasts ACI data and if “ACI
START/ACI SKIP” appears in the AUTO PROGRAM menu,
the ACI function is enabled. In all other cases, it is disabled.

Press the

button to choose ACI

START. Then press the

button to start

the ACI function.

When you don't want to use the ACI function:

Press the

button to choose ACI SKIP and then

press the

button.

If the AUTO PROGRAM menu changes to another
menu:

Depending on your cable TV station, there may be a
broadcast selection menu set up by the cable TV station.
Follow the menu indications and use the

and

buttons to operate the menu. After you have made the
setting, press the

button.

If “ACI ERROR” is displayed in the AUTO PROGRAM
menu:

“ACI ERROR” denotes that the ACI function is not work-
ing properly. Press the

button to start the ACI func-

tion again.
If “ACI ERROR” still appears even after you have tried to
start the ACI function several times, press the

button

to start the AUTO PROGRAM function. It does not cause
any problem because all the TV channels are registered
to the Programme numbers (PR) by the AUTO PRO-
GRAM function.

When the settings are completed, the EDIT
menu is displayed. Return to the instruc-
tions that you were reading before, and
continue the operation.

When the “Initial Settings” has been made:

Return to step 6 of “Initial Settings” on page 4.

When the “AUTO PROGRAM” has been made:

Return to step 4 of “AUTO PROGRAM” on page 23.

Note:

•

If you have any questions about the items in the
Broadcast Selection menu or how to operate the
menu, please contact your cable TV station.

•

When the cable TV broadcast reception is poor, the
ACI function will not work properly.

•

If there is an error in the ACI data itself, the TV chan-
nel cannot be registered properly. If this happens,
turn the ACI function off (ACI SKIP) and use the
AUTO PROGRAM function. Alternatively, use the
EDIT/MANUAL function to correct the Programme
number (PR) setting.

■

Downloading the data to VCR

You can transmit to the latest Programme numbers (PR) data
to the VCR with the T-V LINK function.

Caution:

•

Only when the T-V LINK compatible VCR is connected to
the EXT-2 terminal, this operation is enabled.

•

Only when the T-V LINK menu is being displayed, this oper-
ation is enabled.

Turn on the VCR.

Press the

button.

The data transmission begins.

The T-V LINK menu disappears once the data transmis-
sion ends.

When the T-V LINK menu is changed over to
another menu:

The menu operation at the TV side is completed and it is
shifted to the menu operation at the VCR side. Refer to
the VCR Instruction Manual and operate the VCR.

Note:

•

If “FEATURE NOT AVAILABLE” appears at the T-V
LINK menu, ensure the following three items are cor-
rect; then press the

button to retry data trans-

mission.

−

Has the T-V LINK compatible VCR been connect-
ed to the EXT-2 terminal?

−

Has the VCR power been turned on?

−

Does the SCART cable that is connected to the
EXT-2 terminal to T-V LINK compatible VCR have
all proper connections?

■

Changing the COUNTRY set-

ting

After the AUTO PROGRAM function is completed, you can
change the country you have already set by using the AUTO
PROGRAM function.
When registering the TV channels for French broadcast
stations (SECAM-L system), perform this operation to change
the country.

Display the INSTALL menu.

When the EDIT menu is currently being dis-
played:

Press the

(Information) to return to the INSTALL

menu.

D0005-EN

BACK

DOWNLOAD TV

VCR

T-V LINK

EXIT

D0037-EN