EN
35
HOW TO STORE JLIP PLAYER DATA
Data from this unit can be converted to JLIP Player software files.
If index image data is saved as a JLIP Player software file, the file can be printed with the
optional GV-PT2 Video Printer.
Refer to the instruction manual for details.
Preparation
•Make sure all units are properly connected
(
Z
p. 12).
•Insert a video tape into the video source
unit.
•If you want to store the data on a floppy
disk, load a data disk into the floppy disk
drive, create a directory and sub-directory
on the data disk (
Z
p. 54).
1
Open the menu bar and click "File" —
"Save As JLIP (jlp) File".
•The "Save As JLIP (jlp) File" window is
displayed.
2
Enter the folder name (directory) and file
name.
•If you want to store the data on a
floppy disk, enter the drive name.
3
Click "OK".
•The data converted to a JLIP Player
software file is stored on the floppy disk
in the selected drive.
•JLIP Player software files can be used
for video program editing or printed
with the video printer
(
Z
p. 58, 60)
.
NOTE : When stored data is opened with
the JLIP Player software, the edit-in
and edit-out points have the same
counter value. When you want to
perform program editing, change
the counter number at the edit-out
point in the JLIP Player software’s
"Modify Edit Points".
File
Save Image As…
Exit
Ctrl+S
Ctrl+A
New Album
Open Album
Save Album
Open JLIP (jlp) File
Save As JLIP (jlp) File
