ENGLISH
53
CONNECTION/INSTALLATION
CONNECTION/INSTALLATION
V
CAUTION
Install this unit in the console of your vehicle.
Do not touch the metal parts of this unit during
and shortly after the use of the unit. Metal parts
such as the heat sink and enclosure become hot.
❏
Supplied accessories for installation
1
Wiring harness x 1
2
Extension wire (2
m) x 1
3
Flat head screws (M5 x 7 mm) x 6
4
Round head screws (M5 x 6 mm) x 6
5
Steering Remote cable x 1*
6
Microphone (3
m) x 1
7
Fixture for HDMI/MHL connector x 1
8
Screws for fixture (M2.6 x 6 mm) x 1
*
Only for KW-V620BT Region 3/KW-V620BTM.
❏
Installation procedure
1
To prevent a short circuit, remove the key
from the ignition and disconnect the
·
battery.
2
Make the proper input and output wire
connections for each unit.
3
Connect the speaker wires of the wiring
harness.
4
Connect the wiring harness wires in the
following order: ground, battery, ignition.
5
Connect the wiring harness connector to
the unit.
6
Install the unit in your car.
• Make sure that the unit is installed securely
in place. If the unit is unstable, it may
malfunction (e.g., the sound may skip).
7
Reconnect the
·
battery.
8
Press the reset button.
9
Configure
<Initial Setup>
. (Page
4)
Installing the unit
❏
Installing the unit using the mounting
bracket removed from the car
Car Bracket
3
or
4
3
or
4
• Select the appropriate type of screw for the
mounting bracket: flat head (
3
) or round head
(
4
).
2016̲KW-V̲Mid̲M.indb 53
2016̲KW-V̲Mid̲M.indb 53
2016/01/13 10:13
2016/01/13 10:13