22
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
[MANUAL EQ]
Adjusts your own sound settings for each source.
• The settings are stored to
[USER]
in
[PRESET EQ]
.
• The settings made may affect the current settings of
[EASY EQ]
.
[62.5HZ]
[LEVEL]
[LEVEL –9]
to
[LEVEL +9]
(
[LEVEL 0]
): Adjusts
the level to memorize for each source.
(Before making an adjustment, select the source
you want to adjust.)
[BASS EXTEND]
[ON]
: Turns on the extended bass. ;
[OFF]
: Cancels.
[100HZ]
/
[160HZ]
/
[250HZ]
/
[400HZ]
/
[630HZ]
/
[1KHZ]
/
[1.6KHZ]
/
[2.5KHZ]
/
[4KHZ]
/
[6.3KHZ]
/
[10KHZ]
/
[16KHZ]
[LEVEL –9]
to
[LEVEL +9]
(
[LEVEL 0]
): Adjusts the level to memorize
for each source.
(Before making an adjustment, select the source you want to adjust.)
[Q FACTOR]
[1.35]
/
[1.50]
/
[2.00]
: Adjusts the quality factor.
[PRESET EQ]
[NATURAL]
/
[ROCK]
/
[POPS]
/
[EASY]
/
[TOP40]
/
[JAZZ]
/
[POWERFUL]
/
[USER]
: Selects a preset equalizer suitable to the music genre.
• When the display demonstration is activated (
[ON]
is selected
initially, page 26),
[ROCK]
is automatically selected as the
[PRESET EQ]
.
– If you set
[DEMO MODE]
to
[OFF]
(page 26),
[NATURAL]
is
selected as the default setting for
[PRESET EQ]
.
(Select
[USER]
to use the settings made in
[EASY EQ]
or
[MANUAL EQ]
.)
[BASS BOOST]
[LV1]
to
[LV5]
: Selects your preferred bass boost level. ;
[OFF]
: Cancels.
[LOUDNESS]
[LV1]
/
[LV2]
: Selects your preferred low or high frequencies boost to
produce a well-balanced sound at low volume. ;
[OFF]
: Cancels.
[SUBWOOFER SET]
[ON]
: Turns on the subwoofer output. ;
[OFF]
: Cancels.
[FADER]
(Not applicable if 3-way crossover is selected.) (Page 6)
[R15]
to
[F15]
(
[0]
): Adjusts the front and rear speaker output balance.
[BALANCE]
[L15]
to
[R15]
(
[0]
): Adjusts the left and right speaker output balance.
[VOLUME OFFSET]
[–15]
to
[+6]
(
[0]
): Presets the initial volume level of each source by
comparing to the FM volume level.
(Before adjustment, select the source you want to adjust.)
[SOUND EFFECT]
[SOUND RECNSTR]
(Sound
reconstruction)
(Not applicable for RADIO source and AUX source.)
[ON]
: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost in
audio data compression. ;
[OFF]
: Cancels.
[SPACE ENHANCE]
(Not applicable for RADIO source.)
[SML]
/
[MED]
/
[LRG]
: Virtually enhances the sound space. ;
[OFF]
: Cancels.
[SND REALIZER]
[LV1]
/
[LV2]
/
[LV3]
: Virtually makes the sound more realistic. ;
[OFF]
: Cancels.
[STAGE EQ]
[LOW]
/
[MID]
/
[HI]
: Virtually adjusts the sound position heard from the
speakers. ;
[OFF]
: Cancels.
[DRIVE EQ]
[ON]
: Boosts the frequency to reduce the noise heard from outside the
car or running noise of the tyres. ;
[OFF]
: Cancels.
[SPEAKER SIZE]
Depending on the crossover type you have selected (see “Change the
crossover type” on page 6), 2-way crossover or 3-way crossover
setting items will be shown. (See “Crossover settings” on page 23.)
By default, 2-way crossover type is selected.
[X ‘ OVER]
[DTA SETTINGS]
For settings, see “Digital Time Alignment settings” on page 24.
[CAR SETTINGS]
• For 2-way crossover:
[SUB-W LEVEL]
/
[SUBWOOFER SET]
is selectable only if
[SWITCH PREOUT]
is set to
[SUB-W]
. (Page 5)
•
[SUB-W LEVEL]
is selectable only when
[SUBWOOFER SET]
is set to
[ON]
.
Audio Settings
KDC-BT665U_E_B5A-3887-00_EN_1st Draft.indd 22
KDC-BT665U_E_B5A-3887-00_EN_1st Draft.indd 22
7/9/2021 9:37:15 AM
7/9/2021 9:37:15 AM
