12
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
KENWOOD Remote Application
You can control the KENWOOD car receiver from iPhone/iPod touch (via
Bluetooth or via USB input terminal) or Android device (via Bluetooth) using
KENWOOD Remote application.
• For more information, visit <https://www.kenwood.com/cs/ce/>.
Preparation:
Install the latest version of KENWOOD Remote application on your device
before connecting.
Start using KENWOOD Remote application
1
Start up the KENWOOD Remote application on your device.
2
Connect your device.
• For Android device:
Pair the Android device with this unit via Bluetooth. (Page 13)
• For iPhone/iPod touch:
Connect iPhone/iPod touch to the USB input terminal. (Page 8)
(or)
Pair the iPhone/iPod touch with this unit via Bluetooth. (Page 13)
(Make sure the USB input terminal is not connected to any device.)
3
Select the device to use from the
[FUNCTION]
menu.
See the following “Settings to use KENWOOD Remote application”.
By default,
[ANDROID]
is selected. To use iPhone/iPod touch, select
[YES]
for
[IOS]
.
Settings to use KENWOOD Remote application
1
Press the volume knob to enter
[FUNCTION]
.
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3
Repeat step 2 until the desired item is selected/activated.
4
Press and hold
to exit.
To return to the previous setting item, press
.
Default:
[XX]
[REMOTE APP]
[SELECT]
Selects the device (
[IOS]
or
[ANDROID]
) to use the application.
[IOS]
[YES]
: Selects iPhone/iPod touch to use the application via Bluetooth or
connected via USB input terminal. ;
[NO]
: Cancels.
If
[IOS]
is selected, select iPod BT source (or iPod USB source if your
iPhone/iPod touch is connected via USB input terminal) to activate the
application.
• See “Set the playable source for iPod/iPhone” on page 9 for further
information.
• The connectivity of the application will be interrupted or disconnected
if:
– You change from iPod BT source to any playback source connected
via the USB input terminal.
– You change from iPod USB source to iPod BT source.
[ANDROID]
[YES]
: Selects Android device to use the application via Bluetooth. ;
[NO]
: Cancels.
[ANDROID LIST]
Selects the Android device to use from the list.
• Displayed only when
[ANDROID]
of
[SELECT]
is set to
[YES]
.
[STATUS]
Shows the status of the selected device.
[IOS CONNECTED]
: You are able to use the application using the iPhone/
iPod touch connected via Bluetooth or USB input terminal.
[IOS NOT CONNECTED]
: No iOS device is connected to use the
application.
[ANDROID CONNECTED]
: You are able to use the application using the
Android device connected via Bluetooth.
[ANDROID NOT CONNECTED]
: No Android device is connected to use
the application.
KDC-BT665U_E_B5A-3887-00_EN_1st Draft.indd 12
KDC-BT665U_E_B5A-3887-00_EN_1st Draft.indd 12
7/9/2021 9:37:14 AM
7/9/2021 9:37:14 AM
