Saf
ety Precautions
36
●
When suddenly brought into a warm place from a cold
place, or when in a humid location, or when used where
temperature suddenly changes (e.g. near the air discharge
port of an air conditioner), water droplets (i.e. condensation)
sometimes are formed inside the product. Note that when
used under conditions such as this, humidity might cause
corrosion or a fault.
●
Camera lens part or inside of the display may mist over (dew
formation) because of usage environment such as temperature
or humidity. This is not malfunctioning or abnormal.
●
Environment for easily generating dew formation on the
camera lens part or inside of the display
In the following cases, such as large temperature change or
high humidity, camera lens part or inside of the display mist
over because of usage environment.
・
Bring the product from a high temperature land into a low
temperature water.
・
Bring the product from a cold place into a warm place
such as an indoor.
・
Open/Close the microSD memory card slot cover in a high
humidity environment.
●
How to reduce condensation
Do not use the product in places that get hot and humid,
and sandy or dusty places. Leave the product with the
microSD memory card slot cover opened for a while until
the condensation is cleared when the ambient temperature
is held constant.
●
While writing/reading data to/from a microSD memory card,
do not subject the product to vibration or impact, or turn off
the power. Doing so may cause data loss or malfunction.
●
Do not cover the sensor with your finger or put a sticker on
it. May hinder the sensor from detecting the ambient light
level and functioning correctly.
●
Keep the microSD memory card slot cover closed when
using the product. Using the product with the cover
opened can allow dust, liquid, etc. to enter and may cause
malfunction.
●
Do not allow liquids, metal objects, or other foreign objects
to get inside of the microSD memory card slot. Doing so
may cause malfunction.
●
Do not give strong impact on the product such as dropping,
throwing, stomping. Doing so may cause malfunction.
●
Do not place the product directly on sand at a beach, etc.
If sand or other small particles get inside the microphone,
speaker, or the product, it may cause the volume to drop or
malfunction.
■
Touch Panel
●
Any soiling on the display surface may cause false
operation. Wipe the display with a soft, dry cloth.
●
Putting stickers or sheets (e.g. commercially available
protective films, peep prevention sheets) on the display
might cause incorrect operation of the touch panel.
●
When carrying the product in your bag, etc., take care not
to put the touch panel close to metals or other conductive
materials, as it might cause false operation of the touch
panel.
Summary of Contents for KC-T301DT
Page 1: ...User Guide ...