6
Errors and changes are reserved.
Assembly and instruction manual
|
DLS Color Viewing Light v8 S
|
Rev 1.0
Installation:
Check the delivery for completeness and undamaged condition immediately after receipt
by unpacking and inspecting all components, comparing this to the packing list. Contact us
immediately if anything is missing. The device overview can be found on page 09.
Keep the device disconnected from the power supply until the installation has been
carried out.
Do not switch on the device if it shows any damage. When a defect is detected, the power
supply must be disconnected immediately, as protection against the risk of electric shock and
short circuit is no longer provided.
Connect only to grounded power sources or grounded electrical outlets.
Repair and tube replacement:
Do not make any repairs or modifications to your proofing device or the power cable.
Defective luminaires may only be replaced by the manufacturer, because incorrect repairs can
cause considerable consequential damage. In case of defects, contact the responsible sales
department (see page 18).
Do not replace any parts of the device unless this is expressly provided for in the operating
instructions.
Care instructions:
Care must be taken to ensure that no moisture enters the connection compartments, cables
or other parts with electricity. Moisture in the luminaire can cause an electric shock or short
circuit.
Clean the surfaces of the device using a damp cloth and commercially available cleaning
agents. Do not clean the acrylic glass panes with harsh cleaning agents. The surface of the
base frame, which is deliberately kept matt, is sensitive to scratches, which may also only be
cleaned with a soft cloth.
The use of improper cleaning agents may cause stains, damage to the surfaces or
discoloration of the lenses.
Summary of Contents for 203079
Page 21: ......
