14
Errors and changes are reserved.
Assembly and instruction manual
|
DLS Color Viewing Light v8 S
|
Rev 1.0
Troubleshooting
The DLS Color Viewing Light v8 is a low-error light booth. Technical errors on the device can
often be rectified by the user. The following instructions can help to rectify the error:
The display remains off.
There is no power. First check whether you‘ve got power and whether the device is connected
to the right power supply in accordance with its specifications (110 V or 230 V). Then check
if the device is switched on at the black main switch at the back of the housing and switch
them on if necessary.
The light does not turn on.
There is no power or the fuse for the light has blown. First check whether you‘ve got power
and whether the device is connected to the right power supply in accordance with its
specifications (110 V or 230 V). Check the lamp‘s fuse, or have it checked by an electrician.
You can usually find it at the device‘s main input.
If you have any issues, please contact your local dealer (see page 18).
To do this, have the article and serial number of your DLS Color Viewing Light v8 ready.
This can be found at the silver-coloured rating plate on the back near the mains input of your
device, which indicates the respective article and serial number, among other things.
Summary of Contents for 203079
Page 21: ......
