12
Errors and changes are reserved.
Assembly and instruction manual
|
DLS Color Viewing Light v8 S
|
Rev 1.0
Programming light sequences
With the sequence function, you can save and start different consecutive light sequences.
To save a light sequence, proceed as follows:
1. Press the menu key (H).
2. Select
Sequence Setup
with + key and confirm with OK.
3. Open a programm of your choice with the + key and OK key.
4. Select the first type of light you want to by pressing the respective key (A-D).
5. Confirm with OK.
6. Set the desired light intensity with the -/+ keys (only possible for A and B).
7. Save with OK.
8. Confirm
S=1/5
with the + key.
S=sequence; 1 means that you select the first light type
9.
S=2/5
displayed.
10. Select the second illuminant (A-D) you want.
11. Select the illuminant again to open it.
12. Repeat step 4 to step 8.
Press and hold the OK button for two seconds to save the sequence.
You can set the duration of the respective sequence via
T
.
Saved light sequences can be switched on with AUTO (G).
Summary of Contents for 203079
Page 21: ......
