11
Errors and changes are reserved.
Assembly and instruction manual
|
DLS Color Viewing Light v7 XL
|
Rev 1.0
Operating instruction
Commissioning
1. Use the black main switch on the back of
the housing to turn on the light. The diode
(H) lights up when the light is in standby
mode.
2. Choose illuminant (A, C or D). The
indicator above the switch of the active
illuminant is shining green.
3. If required, you can dimm the luminaire (F)
or switch off UV content of illuminant D50
/ D65 (B). A red indicator is shining if UV
content is switched off (H).
4. The „UV-Only“(D) light type is
independent and completely autonomous
from the „UV on/off“ function (B) which
only refers to the D65 (C) and D50 (A)
light types.
5. Turn off the luminaire by pressing the light
type (A, C or D).
6. The unit can be switched off via the black
main switch.
Notes
When the luminaire is switched on again,
the last set values are used (memory)
Regardless of the memory function, the
set dimming value and light type (with
and without UV component) can be saved
by holding down „P1“ or „P2“ button to
store the current values – all indicators (G)
blink 2x. By briefly pressing the buttons
again, the stored values will be loaded –
single blink of all indicators (G).
(A) Switch on/off illuminant D50 according
to ISO 3664
(B) Switch off/on UV-content
(C) Switch on/off illuminant D65 according
to ISO 3668
(D) Switch on/off UV-Only
(E) Preset 1 - Preset 2
(F) Continuously dimming of illuminants
(see G)
(G) Dimming Indicator
(H) Standby indicator
Summary of Contents for 202539
Page 20: ......
