6.2.2.9
Checking of the running
Lubricate the lobes with oil and grease.
Turn the axles by hand making sure that the group turns
smoothly.
6.2.2.10 Assemble of the oil tank and lubrication of the gears
(Refer to VL 14)
a- Place the gasket of pos. 13 exactly on the oil tank of pos. 20.
13
b- Mount the oil tank by means of the screws of pos. 39.
c- Place the drain plug of pos. 19.
d- Fill the tank with oil up to the level of the drain plug.
Tighten the drain plug and the filling plug (vent) of pos. 36
6.2.2.11 Mount the inlet and outlet connections, if any.
Now the pump can be set at work again.
Fig. 16
13
20
36
39
19
19
Oil level