9
VL 27)
6.2.2.3 Seals housing group VL 7-14-20-27
(Refer to VL 14)
Fig. 10
NOTE: The seal must be filled with the specified grease
ATTENTION: The seal lip must be turned over towards the
inside, otherwise it will not keep the pressure.
6.2.2.2 Axle - Lobe group VL 7-14-20-27
Note: Do not insert the wear bushing pos. 30 ! (Axle - Lobe group
Fig. 9 bis
325
137
ø82 x 72
ø78 x 6
21
4
33
32
150
All edges must be
rounded of - 1x45
°