Elektroapparate AG
Technical information
Technical Support
Language
EN
Z6 One Touch TFT
Author: Patrik Studer
Checked:
Approved:
Docu.-name:
Technische_Informationen_Z6_OT_TFT_EN.docx
L:\Geräte\Linie_Z_Neu\Z6_OT_TFT\Schulungsunterlagen\E\T
echnische_Informationen_Z6_OT_TFT_EN.docx
Date:
Rev. A:
Rev. B:
Rev. C:
Rev. D:
Rev. E:
Rev. F:
30.04.2015
Page 9/16
11
Programming:
11.1
Maintenance status (1/3):
Under Programming/MAINTENANCE STATUS one can read out the actual care status (progress bar)
11.1.1
Clean:
Preparations
Start-up rinses
Display
180
80
CLEAN MACHINE
11.1.2
Descale:
Start descale with 3 JURA descaling tablets (1 blister) and 6 dl (20.3 oz) of water
11.1.3
Change the filter:
The appliance detects automatically that a CLARIS Smart filter cartridge has been inserted or
removed
Liters
Start-up rinses
Display
45-60
180
CHANGE THE FILTER
No time measurement
After
2 months
the filter capacity is reached.
Steam preparation will also be calculated with an internal factor
The filter capacity will be calculated according to the programed water hardness
11.1.3.1
CLARIS Smart / I.W.S.® Intelligent Water System:
At each CLARIS Smart filter change, appliance specific information will be stored (filter size, filter
rinsed, left capacity, quantity after filter alarm, needed amount of rinse water)
If the filter has reached the end of capacity and it will not be changed then after another 10 liters
the appliance changes automatically to descale mode
If a descale message is shown, no filter usage can be made unless a descale procedure had been
done before
A used and empty CLARIS Smart filter cannot be used anymore
