background image

8

The displayed information means the following:

WATER

HARDNESS — Water hardness function switched off

WATER

German water hardness degree 1 to 7°

HARDNESS 1

French Water hardness degree 1.79 – 12.53°

WATER

German water hardness degree 8 to 15°

HARDNESS 2

French Water hardness degree 14.32 – 26.85°

WATER

German water hardness degree 16 to 23°

HARDNESS 3

French Water hardness degree 28.64 – 41.17°

WATER

German water hardness degree 24 to 30°

HARDNESS 4

French Water hardness degree 42.96 – 53.7°

When the machine leaves the factory it is adjusted to Level 3. You
can adjust another hardness. To do this, proceed as follows:

Use the ON/OFF key to switch on the machine.

MACHINE HEATING

RINSE – PRESS DRAW-OFF KEY

Place a cup under the coffee spout and press one of the draw-off
keys (SMALLCUP or LARGECUP).

RINSING

READY

Press the programming key until the machine switches over to
programming mode.

FILTER

Press the arrow keys a number of times until the following
message appears:

HARDNESS

Press the programming key to activate the programming step.

LEVEL 3

Now, use the arrow keys to select the required hardness.

LEVEL 4

Press programming key to confirm your settings.

HARDNESS

Press the arrow keys a number of times until the following
message appears:

EXIT

Press the programming key to quit the programming mode.

READY

If you use a Claris plus filter cartridge, this function is no
longer available.

6. Installation of Claris plus filter cartridges

If the Claris plus filter cartridge is installed properly, de-scal-
ing of the machine is no longer required. . For more infor-
mation on the Claris plus filter cartridge refer to brochure
«Claris plus». Hard on limescale. Gentle on your coffee ma-
chine.»

If you do not use the Claris plus filter cartridge, the machine
must be de-scaled manually. A message requesting you to re-
place the filter will appear on the display

For more information on de-scaling refer to Chapter 17.
Should you have any further questions, please get in touch
with the responsible after-sales hotline which has been set up
for you.

For the hotline telephone numbers, refer to last page.

6.1 Installing the filter

Use the ON/OFF key to switch on the machine.

MACHINE HEATING

RINSE – PRESS DRAW-OFF KEY

Place a cup under the coffee spout and press one of the draw-off
keys (SMALLCUP or LARGECUP).

Summary of Contents for Nespresso N9























Reviews: