18
If applicable, remove the Professional Cappuccino Frother
(optional accessories) before starting the de-scaling opera-
tion.
If acidic de-scaling agents are used, remove any splashes and
drops from sensitive surfaces, in particular surfaces made of
natural stone and wood, alternatively take appropriate pre-
ventive measures.
In any case wait until the de-scaling agent is used up and the
tank is empty. Never refill de-scaling agent.
SCALED / READY
Use the ON/OFF key to switch off the machine.
Take out and empty the water tank.
Press programming key until the following message is displayed:
TRAY / EMPTY
Take out tray, empty it and reinstall it.
FILL IN AGENT – PRESS P
JURA de-scaling tablets
Completely dissolve the content of one blister (3 tablets) in a jug
containing 0.5 liters of water, and fill the mixture in the water tank.
or
NESPRESSO De-scaling Kit
Dissolve 1 pack of de-scaling agent in 0.5 litres of water and fill
the mixture in the water tank.
Reinstall the water tank.
Press programming key.
VALVE / OPEN
Put a sufficiently large container under the hot water jet
Turn the hot water / steam valve to Hot Water / Steam (Fig.4).
MACHINE / DECALC.
VALVE / CLOSE
Turn back the hot water / steam valve to Coffee (Fig. 3).
MACHINE / DECALC.
VALVE / OPEN
Turn the hot water / steam valve to Hot Water / Steam (Fig. 4).
MACHINE / DECALC.
EMPTY / TRAY
Take out tray, empty it and reinstall it.
FILL / WATER
Thoroughly rinse the water tank and fill it with fresh cold tap
water. Then reinstall it.
P-TASTE
Press programming key.
MACHINE / DECALC.
VALVE / CLOSE
Turn back the hot water / steam valve to Coffee (Fig. 3).
MACHINE / DECALC.
TRAY / EMPTY
Take out tray, empty it and reinstall it.
READY
The machine will be switched off automatically after a few sec-
onds.
After the de-scaling, clean the aluminium front using a
slightly moist cloth.
