10
RINSE – PRESS DRAW-OFF KEY
Place a cup under the coffee spout and press one of the draw-off
keys (SMALLCUP or LARGECUP).
RINSING
READY
8. Drawing off espresso
Use the ON/OFF key to switch on the machine.
MACHINE HEATING
RINSE – PRESS DRAW-OFF KEY
Place a cup under the coffee spout and press one of the draw-off
keys (SMALLCUP or LARGECUP).
RINSING
READY
Open the cover and install a capsule (Fig. 5).
COVER / CLOSE
Close the cover again.
READY
Place a cup under the coffee spout and press the required draw-
off key (SMALLCUP or LARGECUP).
SMALLCUP or LARGECUP
Your product is being prepared.
EJECT CAPSULE
Open the cover. The capsule is ejected.
COVER / CLOSE
Close the cover again.
READY
You can stop the draw-off operation at any time by pressing
any key.
9. Drawing off hot water
You can adjust the water portion individually (see Chapter
15.4). Install the hot water jet (Fig. 6) to obtain perfect water
flow..
During operation, the hot water / steam jet may heat up.
However, there is no danger of burns.
At the start of the water draw-off there can be splashing
Avoid direct contact with the skin!
Do not replace the replaceable hot water jet directly after
drawing off water, because the jet is hot after the draw-off
operation.
Use the ON/OFF key to switch on the machine.
MACHINE HEATING
RINSE – PRESS DRAW-OFF KEY
Place a cup under the coffee spout and press one of the draw-off
keys (SMALLCUP or LARGECUP).
RINSING
READY
Place a cup under the hot water jet.
Turn the hot water / steam valve to Hot Water / Steam (Fig. 4).
WATER / PORTION
The programmed portion is being prepared..
VALVE /CLOSE
Turn back the hot water / steam valve to Coffee (Fig. 3).
READY
You can stop the water draw-off operation by turning the hot
water / steam valve to Coffee (Fig. 3).
