19
2 Preparation
Example:
Proceed as follows to prepare a special coffee using the
product selector.
Precondition:
‘Please select product:’
is displayed.
T
Place a cup under the cappuccino frother.
g
T
Turn the Rotary Switch to view the product selector.
g
T
Turn the Rotary Switch until the
‘Special coffee’
product is in
focus.
k
T
Press the Rotary Switch to start preparation.
Preparation starts. The preset amount of water for special
coffee flows into the cup.
Preparation stops automatically.
‘Please select product:’
appears on the display.
Your IMPRESSA can prepare a latte macchiato or cappuccino at the
touch of a button. There is no need to move the glass or cup.
Example:
Proceed as follows to prepare one latte macchiato at the
touch of a button.
Precondition:
‘Please select product:’
is displayed. Milk is connected
to the cappuccino frother.
T
Place a glass under the cappuccino frother (Figure: JURA
0.6 litre stainless steel vacuum milk container).
E
Ensure that the level of the milk is
no higher
than the milk
pipe connection on the cappuccino frother.
T
Turn the setting wheel of the cappuccino frother to the Milk
Foam position
ü
.
T
Press the
‘Latte macchiato’
button.
‘Latte macchiato’
, the milk foam is prepared.
Preparation stops automatically when the preset amount of
milk is reached.
E
There is a short interval while the hot milk separates from the
milk foam. This allows the typical layers of a latte macchiato
to form. You can choose the length of this interval in program-
ming mode (see Chapter 4 ‘Permanent settings in program-
ming mode – Product settings’).
Special coffee
Latte macchiato,
cappuccino
