background image

9

Now select the corresponding level with the 

selector switch

and press the 

switch to store the setting. The warning lamps

go off.

It is only necessary to adjust the water hardness before the
machine is used for the first time or when a different quality
of water is used.
If no water hardness level is changed within 60 seconds, the
display goes out and the last value programmed remains
unchanged.

3.8 Adjustable automatic close-down

You can adjust the automatic close-down of 2 hours set by Jura to
your own requirements. The machine provides 3 different levels:

1st Level

Warning lamp 

flashes. 

The automatic close-down is not activated.

2nd Level

Warning lamp 

flashes, warning lamps  , 

light up.

Automatic close-down is set to 2 hours.

3rd Level

Warning lamp 

flashes, warning lamps 

,  , 

light up.
Automatic close-down is set to 5 hours.

To set or alter the automatic close-down follow the instructions
below:

Put the mains plug into the wall socket.

Leave the machine switched 

off

.

Press 

draw-off button for about 3 seconds and choose the

required setting by pressing 

selector switch.

Push button to store level in memory 

.

If no change to the setting level is made within 60 seconds,
the warning lamps go out and the last level stored remains
effective.

4. Preparing machine

Switch your machine on with the 

switch.

The warning lamp 

and the small light in the steam selector

switch (14) flash.

Place an empty cup under the pivoting nozzle (17).

Turn the selector switch for steam/hot water (15) to the 

po-

sition.

Now the machine produce steam followed by water. The water
flow is stopped automatically.

Turn the selector switch for steam/hot water (15) back to the 
position.

5. Rinsing the machine

If warning lamp 

light up, the machine needs rinsing.

Place an empty cup under the coffee-spout (16).

Press 

rinsing button. The rinsing is stopped automatically.

If the machine has been switched off and has already cooled
down it will be necessary to carry out this rinsing function
when the machine is switched on again. After switching off
the machine, the rinsing sets off automatically.

6. Adjusting water volume

Water volume is infinitely adjustable by means of the selector
switch (3). The small cup means a small volume of water for
espresso, the big cup means a larger volume of water for coffee. ll
cup means a small volume of water for espresso, the big cup
means a larger volume of water for coffee.

E

Summary of Contents for IMPRESSA M30


















Reviews: