8
3.6 Adjusting grinder
You can adjust the grinder to the roast of your coffee. We recom-
mend the following:
for a light roast
a finer adjustment
for a dark roast
a coarser adjustment
Open the cover of the bean container (11).
To adjust grinding turn selector switch (Fig. 1) to the desired
position.
You have the following possibilities:
the smaller the dots, the finer the grinding
the bigger the dots, the coarser the grinding
The grinding grade should only be adjusted while the grinder
is working.
3.7 Adjusting for water hardness
The water is heated inside the machine. With use, this leads to
calcium deposits (furring) forming on the machine. This is automa-
tically indicated in the display. For this reason, it is necessary to
adjust the machine to the hardness of your local water before you
use it for the first time. Use the enclosed test-sticks for this purpose.
1° water hardness on the German scale represents 1.79° on
the French scale.
The machine has got 5 hardness settings to choose from. The
chosen grade is shown on the display
Level 0 = Setting for Claris filter cartridges
The warning lamp
flashes.
The display for automatic de-scaling is switched off.
Level 1
The warning lamp
flashes.
The warning lamp
lights up.
German water hardness 1 – 7°
French water hardness 1.79 – 12.53°
Level 2
The warning lamp
flashes.
The warning lamps
,
light up.
German water hardness 8 – 15°
French water hardness 14.32 – 26.85°
Level 3
The warning lamp
flashes.
The warning lamps
,
,
light up.
German water hardness 16 – 23°
French water hardness 28.64 – 41.14°
Level 4
The warning lamp
flashes.
The warning lamps
,
,
,
light up.
German water hardness 24 – 30°
French water hardness 42.96 – 53.7°
In the factory, the machine is set to
level 3
. You can amend this
setting. Please proceed as follows:
Remove the mains plug with the cable from the cable box on the
back of the machine.
Plug into the mains.
Do not
switch the machine on.
Press the
draw-off button for about 3 seconds.
The
warning lamp flashes.
The
,
,
warning lamps light up.
