25
4 Permanent settings in programming mode
In the programme item
‘Product settings (2/6)’
you can make indi-
vidual settings for all speciality coffees and hot water. The following
settings can be made:
Product
Temperature
Coffee strength
Amount
Ristretto,
espresso,
coffee
‘Normal’
,
‘High’
‘extra-mild
;
’
,
‘mild
;;
’
,
‘normal
;;;
’
,
‘strong
;;;;
’
,
‘extra-strong
;;;;;
’
Volume:
‘25 ml’
–
‘240 ml’
Two ristretti,
two espressi,
two coffees
‘Normal’
,
‘High’
–
Volume:
‘25 ml’
–
‘240 ml’
(per cup)
Latte macchiato,
cappuccino
‘Normal’
,
‘High’
‘extra-mild
;
’
,
‘mild
;;
’
,
‘normal
;;;
’
,
‘strong
;;;;
’
,
‘extra-strong
;;;;;
’
Amount of milk:
‘3 sec.’
–
‘120 sec.’
Interval:
‘0 sec.’
–
‘60 sec.’
Volume:
‘25 ml’
–
‘240 ml’
Milk portion
–
–
‘3 sec.’
–
‘120 sec.’
Hot water
‘Low’
,
‘Normal’
,
‘X high’
–
‘25 ml’
–
‘450 ml’
Example:
Proceed as follows to change the amount of milk for a
latte macchiato from
‘16 sec.’
to
‘20 sec.’
, the interval from
‘30 sec.’
to
‘40 sec.’
and the amount of water from
‘45 ml’
to
‘40 ml’
.
Precondition:
‘Please select product:’
is displayed.
O
T
Press the P button.
‘Maintenance status (1/6)’
g
T
Turn the Rotary Switch until the programme item
‘Product
settings (2/6)’
is displayed.
T
Press the
‘Expert mode’
button.
‘Expert mode’
E
Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
T
Press the
‘Latte macchiato’
button.
‘Latte macchiato’
T
Press the
‘Amount of milk’
button.
T
Press the
‘ < ’
or
‘ > ’
button to change setting for the amount
of milk to
‘20 sec.’
.
Product settings
