24
4 Permanent settings in programming mode
4 Permanent settings in programming mode
Press the P button to enter programming mode. You can navigate
through the programme items and permanently save the required
settings simply by turning the Rotary Switch and using the variable
buttons. The following settings can be made:
Programme item
Sub-item
Explanation
‘Maintenance status
(1/6)’
‘Clean’
,
‘Descale’
(only if filter is
not activated),
‘Change the filter’
(only if
filter is activated),
‘Rinse the coffee system’
,
‘Clean the milk system’
T
Start the required maintenance
programme here.
‘Product settings (2/6)’
‘Expert mode’
T
Select your settings for speciality coffees
and hot water.
‘Maintenance settings
(3/6)’
‘Filter’
,
‘Water hardness’
(only if
filter is not activated),
‘Rinse the coffee system’
,
‘Rinse the milk system’
T
Indicate whether you are operating your
IMPRESSA with or without a CLARIS Blue
filter cartridge.
T
Adjust the water hardness.
T
Change the settings for the switch-on
rinse and milk system rinse.
‘Machine settings 1 (4/6)’
‘Save energy’
,
‘Switch off after’
,
‘Units’
,
‘Factory setting’
T
Select an energy-saving mode.
T
Set the time after which the IMPRESSA
should switch off automatically.
T
Select the unit for the amount of water.
T
Reset the permanently set values of all
products to the factory settings.
‘Machine settings 2 (5/6)’ ‘Choose language’
,
‘Display’
,
‘Colour scheme’
T
Select your language and the back-
ground colour for the display.
‘Information (6/6)’
‘Product counter’
,
‘Maintenance counter’
,
‘Version’
T
Keep track of all speciality coffees
prepared and view the number of
maintenance programmes performed.
