12
12. Programming
When your coffee machine leaves the factory it is adjusted such
that you can draw off coffee without having to change any settings.
However, you can programme various parameters individually.
You can programme the following stages:
Filter
Water hardness
Aroma
Temperature
Water quantity for coffee
1 Cup
Steam portion
Water portion
Time
Automatic switch-on time
Automatic switch-off time
Draw offs
Language
12.1 Programming the filter
Refer to Chapter 6.1 «Inserting the filter».
12.2 Programming the water hardness
Refer to Chapter 5 «Adjusting the water hardness».
During frothing some water will escape the system before
the actual steam draw-off. This does not affect the result, e.g.
when frothing milk.
At the start of the water draw-off there can be splashing The
steam nozzle becomes hot. Avoid direct contact with the
skin!
Use the key
to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING:
PLEASE SELECT
Press steam portion draw-off key .
MACHINE HEATING UP
PLEASE SELECT
Place a cup under the steam/frothing nozzle (14) and immerse
the frothing aid in the milk to be frothed or the liquid to be
heated.
Press steam draw-off key
again.
STEAM PORTION. Your product is being prepared.
You can stop the draw-off operation at any time by pressing the
steam draw-off key .
PLEASE SELECT
11. Switching off the coffee machine
Use the key
to switch on the coffee machine.
PLEASE SELECT
Use
key to switch
OFF
your coffee machine.
GOOD BYE
The automatic rinsing operation is started.
