46
ENA 5
Place a cup under the nozzle.
Set the selector lever of the nozzle to the
milk foam
p
position.
g T
Turn the Rotary Switch until
STEAM
is
displayed.
k T
Press the Rotary Switch.
HEATING
READY
appears as soon as the ENA is
sufficiently heated.
l T
Turn the switch to position
m
.
STEAM
, the milk foam is being prepared.
y T
Turn the switch clockwise to position
o
when there is sufficient milk foam in the
cup.
You can prepare more milk foam within
about 40 seconds.
Place the cup under the coffee spout.
k T
Press the Rotary Switch to start coffee
preparation.
1 CUP
, the pre-set amount of water flows
into the cup. Preparation stops automati-
cally.
To ensure that the Professional Cappuccino
Frother works perfectly, it should be rinsed
and cleaned regularly (refer to Chapter 4
‘Maintenance – Professional Cappuccino
Frother’).
Cappuccino with the Easy Cappuccino
Frother
Precondition
:
READY
appears on the display
and the coffee spout is set at the 1 cup position.
T
T
E
T
Remove the protective cover from the
Easy Cappuccino Frother.
Connect the milk pipe to the nozzle.
Insert the other end of the milk pipe into a
milk carton or connect it to a milk
container.
Place a cup under the nozzle.
g T
Turn the Rotary Switch until
STEAM
is
displayed.
k T
Press the Rotary Switch.
HEATING
READY
appears as soon as the ENA is
sufficiently heated.
l T
Turn the switch to position
m
.
STEAM
, the milk foam is being prepared.
y T
Turn the switch clockwise to position
o
when there is sufficient milk foam in the
cup.
You can prepare more milk foam within
about 40 seconds.
Place the cup under the coffee spout.
k T
Press the Rotary Switch to start the coffee
preparation.
1 CUP
, the pre-set amount of water flows
into the cup. Preparation stops automati-
cally.
To ensure that the Easy Cappuccino Frother
works perfectly, it should be rinsed and
cleaned regularly (refer to Chapter 4
‘Maintenance – Easy Cappuccino Frother’).
T
T
T
T
E
T
