10
7. Drawing off espresso/normal coffee
Switch on the machine by pressing button. The machine is ready as
soon as the warning lamp
lights up.
Place 1 or 2 cups under the coffee-spout and press the appro-
priate button. The pre-brew function (P.B.A.S
©
) moistens the
coffee powder, briefly interrupts the flow and then the real
brewing process begins.
Note: You can interrupt the flow of coffee at any time by
simply pressing any one of the coffee buttons.
Tip: Adjust the coffee-spout height to the size of your cups
to obtain a perfect head of froth (Fig. 3).
7.1 Drawing off espresso/strong coffee
Place 1 cup under coffee-spout (9) and press the required
button until the warning lamp
lights up. Warning lamp
flashes.
Note: You can only draw off 1 cup of strong coffee at a
time.
7.2 Drawing off espresso/extra-strong coffee
Place 1 cup under coffee-spout (9).
Press the required button until warning lamps,
,
flash.
Note: You can only draw off 1 cup of extra-strong coffee at
a time.
7.3 Using pre-ground powder coffee
Press
button.Warning lamps
and
light up.
Now put 1 or 2 level measuring spoons of pre-ground coffee
(Fig. 4) into the powder funnel (10).
Place 1 or 2 cups under coffee-spout and press the coffee button
required.
Important: Never use soluble instant coffee or quick coffee.
Only use coffee powder from freshly ground beans or pre-
ground vacuum-packed coffee.
Never fill the funnel with
more than 1 or 2 portions at a time. The powder funnel
is not intended as a storage container.
Note: If button
is pressed by mistake, this can be cor-
rected by pressing button
. The machine rinses.
Tip: We recommend a regular cleaning of the funnel with a
bottle-brush after drawing off powder coffee.
8. Using steam
Steam can be used for heating up liquids as well as for frothing up
milk for cappuccinos. To heat up liquids remember to push the
frothing nozzle (14) up. For frothing up liquids push the nozzle
down (Fig. 5).
Put a cup under the pivoting nozzle (13).
Immerse the frothing nozzle (14) into the milk you want to froth
or into the liquid you want to heat up. Turn selector switch for
coffee or hot-water/steam (12) to position
(Fig. 5).
To stop steam-function turn selector switch for coffee or hot-
water/steam (12) back to position
.
Warning lamps
,
,
,
flash.
If you would like to draw off coffee right after drawing off
steam, proceed as described in chapter 8.1.
Note: The max. drawing off time for steam is about 8 minu-
tes. Due to the start frothing. This water should be drawn off
before drawing off steam. However the perfect result (e.g. of
frothing milk) is not influenced.
