42
5 Maintenance
E
After 100 litres of water have flowed through or after two
months, the filter will cease to work. Your GIGA will automati-
cally prompt you to change the filter.
E
If the CLARIS Pro filter cartridge is not activated in program-
ming mode, you will not be prompted to change the filter.
Example:
Proceed as follows to change the filter when prompted to
do so.
Precondition:
‘Change the filter’
and the
c
symbol are displayed.
O
T
Press the P button.
‘Maintenance status (1/5)’
T
Press the
‘Change the filter’
button.
T
Press the
‘Start’
button.
T
Press the
‘Start’
button again.
‘Change filter.’
/
‘Press the Rotary Switch.’
T
Remove and empty the water tank.
T
Open the filter holder and remove the old CLARIS Pro filter
cartridge.
T
Insert the new filter cartridge into the water tank, exerting
slight pressure.
T
Close the filter holder. It will click into place audibly.
T
Fill the water tank with fresh, cold water and reinsert the tank.
k
T
Press the Rotary Switch.
‘Filter is being rinsed.’
, the filter is rinsed. Rinsing of the filter
stops automatically.
‘Empty drip tray.’
appears on the display.
T
Empty the drip tray and coffee grounds container and put
them back into the machine.
‘Change the filter’
/
‘Filter rinsing complete.’
The machine heats up.
‘Please select product:’
appears on
the display.
After 220 preparations or 80 switch-on rinses, the GIGA will prompt
you to clean it.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T
Use only original JURA maintenance products.
E
The cleaning programme lasts approximately 20 minutes.
Changing the filter
Cleaning the machine
CAUTION
