7 Maintenance
24
T
Place the container under the dual spout and connect the milk
pipe with the container�
E
To connect the milk pipe to the container correctly, the pipe
must be fitted with a connector�
T
Slide the dual spout down to fix the container in place�
T
Touch
‘Start’
�
The dual spout and the milk pipe are cleaned�
The operation stops automatically�
If insufficient foam is produced when the milk is frothed or milk
sprays out of the dual spout, the spout may be dirty� If this happens,
dismantle and rinse the dual spout�
T
Remove the milk pipe and rinse it thoroughly under running
water�
T
Press the releasing devices and pull the cover of the dual spout
up and off�
T
Remove the milk system from the dual spout�
E
Do not lever the milk system back and forth to disconnect it
from the milk pipe connection� Remove the milk system
firmly to prevent it from tilting�
T
Dismantle the milk system into its individual parts�
T
Rinse all the parts under running water� If there are severely
dried-on milk residues, firstly immerse the individual parts in a
solution of 8�5 oz (250 ml) warm water and one dosing unit of
JURA milk system cleaner� Then rinse the individual parts
thoroughly�
Dismantling and rinsing the
dual spout
