32
ENA X1
Adjusting grinder
You can adjust the grinder
continuously
to suit
the roast of your coffee.
CAUTION
If you adjust the fineness of grind when the
grinder is not operating, the grinding wheel could
be damaged.
Only adjust the fineness of grind when the
grinder is running.
The fineness of grind setting is correct if the
coffee flows regularly from the coffee spout. A
fine, thick crema is also formed.
Example
: Adjusting the fineness of grind
during
coffee preparation.
Place the cup under the coffee spout.
k T
Press the Rotary Switch to start coffee
preparation.
Turn the fineness of the grinding wheel to
the desired position
while
the grinder is
running.
COFFEE
, the pre-set amount of water
flows into the cup, preparation stops
automatically.
READY
Switching on the machine
When the ENA is switched on, a switch-on rinse
starts automatically.
Place a receptacle under the coffee spout.
T
T
T
T
Q T
Press the On/Off button to switch the
ENA on.
HEATING
RINSING
, the system is being rinsed. The
operation stops automatically.
READY
Switching off the machine
When the ENA is switched off, the system is
automatically rinsed if a coffee speciality has been
prepared.
Place a receptacle under the coffee spout.
Turn the coffee spout to the cleaning
position.
Q T
Press the On/Off button.
RINSING
, the system is being rinsed, the
operation stops automatically. The ENA is
switched off.
Turn the coffee spout to the 1 cup or 2 cup
position.
The On/Off button also acts as a power
switch. When the ENA is switched off, the
machine consumes no standby energy.
2 Preparation
Coffee
During preparation, you can interrupt the
machine at any time. To do this, press the
Rotary Switch.
T
T
T
E
E
