26
ENA 5
Changing the filter – manually
The ‘Change filter’ operation can be manually
initiated.
Precondition
:
READY
appears on the display.
Open the cover behind the Rotary Switch.
P T
Press the P button
until
RINSE
appears.
k T
Press the Rotary Switch to enter the
programme item.
RINSE
g T
Turn the Rotary Switch until
FILTER
is
displayed.
k T
Press the Rotary Switch.
INSERT FILTER
Continue with the
third
prompt to take
action (indicated by
T
), as described in the
section ‘
Changing the filter following a
prompt’
.
Cleaning the machine following a prompt
After 180 coffee preparations or 80 switch-on
rinses, the ENA will prompt you to clean the
machine.
CAUTION
If the wrong cleaning agent is used, the machine
could be damaged and/or detergent residues
could be left in the water.
Only use original JURA care products.
The cleaning programme only lasts about
15 minutes.
Do not interrupt the cleaning programme.
The quality of cleaning will be impaired if
you do so.
JURA cleaning tablets are available from
stockists.
Precondition
:
CLEAN
/
READY
is displayed.
Open the cover behind the Rotary Switch.
c T
Press the maintenance button.
EMPTY TRAY
T
T
T
E
E
E
T
Empty the coffee grounds container and
drip tray and replace.
PRESS ROTARY
Turn the coffee spout to the cleaning
position.
Place a receptacle under the coffee spout.
k T
Press the Rotary Switch to start cleaning.
CLEANING
, water flows out of the
coffee spout.
The process is interrupted.
ADD TABLET
Open the powder chute for for pre-ground
coffee and drop in a JURA cleaning tablet.
Close the powder chute for pre-ground
coffee.
PRESS ROTARY
k T
Press the Rotary Switch.
CLEANING
, water flows out of the
coffee spout several times.
EMPTY TRAY
Empty the coffee grounds container and
drip tray and replace.
READY
Turn the coffee spout to the 1 cup or 2 cup
position.
T
T
T
T
T
T
T
Summary of Contents for ENA 5
Page 5: ...5 ENA 5 de fr it en it ...
