20
ENA 5
Cappuccino with the
Easy Cappuccino Frother
Precondition
:
READY
appears on the display
and the coffee spout is set at the 1 cup position.
Remove the protective cover from the
Easy Cappuccino Frother.
Connect the milk pipe to the nozzle.
Insert the other end of the milk pipe into a
milk carton or connect it to a milk
container.
Place a cup under the nozzle.
g T
Turn the Rotary Switch until
STEAM
is
displayed.
k T
Press the Rotary Switch.
HEATING
READY
appears as soon as the ENA is
sufficiently heated.
l T
Turn the switch to position
m
.
STEAM
, the milk foam is being prepared.
y T
Turn the switch clockwise to position
o
when there is sufficient milk foam in the
cup.
You can prepare more milk foam within
about 40 seconds.
Place the cup under the coffee spout.
k T
Press the Rotary Switch to start the coffee
preparation.
1 CUP
, the pre-set amount of water
flows into the cup. Preparation stops
automatically.
T
T
T
T
E
T
To ensure that the Easy Cappuccino Frother
works perfectly, it should be rinsed and
cleaned regularly (refer to Chapter 4
‘Maintenance – Easy Cappuccino Frother’).
Cappuccino with the 2-stage frothing nozzle
Precondition
:
READY
appears on the display
and the coffee spout is set at the 1 cup position.
Push the 2-stage frothing nozzle to the
lower
position.
Place a cup of milk below the 2-stage
frothing nozzle and immerse the nozzle in
the milk.
If the nozzle does not reach into the cup, lift
the cup towards the nozzle.
g T
Turn the Rotary Switch until
STEAM
is
displayed.
k T
Press the Rotary Switch.
HEATING
READY
appears as soon as the ENA is
sufficiently heated.
l T
Turn the switch to position
m
.
STEAM
, the milk is foamed by the hot
steam.
y T
Turn the switch to position
o
when the
milk foam has reached the required
consistency.
You can prepare more steam within about
40 seconds.
T
T
E
E
Summary of Contents for ENA 5
Page 5: ...5 ENA 5 de fr it en it ...
