19
ENA 5
Entering a default setting for the amount of
water for a cup size
A default setting can be entered for the
amount of water for 1 coffee. When
preparing 2 coffees this amount is
dispensed per cup.
Precondition
:
READY
appears on the display
and the coffee spout is set at the 1 cup position.
Place the cup under the coffee spout.
k T
Press the Rotary Switch and
hold it down
.
During grinding the strength of the coffee
is displayed.
k T
Continue to hold the Rotary Switch
down
until
ENOUGH COFFEE ?
appears.
The coffee flows into the cup.
k T
Press the Rotary Switch again when enough
coffee has been filled into the cup.
OK
, the default setting for the amount of
water for one coffee has been entered.
READY
This setting can be changed at any time by
repeating the above procedure.
Cappuccino with the
Professional Cappuccino Frother
Precondition
:
READY
appears on the display
and the coffee spout is set to the 1 cup position.
Remove the protective cover from the
Professional Cappuccino Frother.
Connect the milk pipe to the nozzle.
Insert the other end of the milk pipe into a
milk carton or connect it to a milk
container.
Place a cup under the nozzle.
E
T
E
T
T
T
T
Set the selector lever of the nozzle to the
milk foam
p
position.
g T
Turn the Rotary Switch until
STEAM
is
displayed.
k T
Press the Rotary Switch.
HEATING
READY
appears as soon as the ENA is
sufficiently heated.
l T
Turn the switch to position
m
.
STEAM
, the milk foam is being prepared.
y T
Turn the switch clockwise to position
o
when there is sufficient milk foam in the
cup.
You can prepare more milk foam within
about 40 seconds.
Place the cup under the coffee spout.
k T
Press the Rotary Switch to start coffee
preparation.
1 CUP
, the pre-set amount of water
flows into the cup. Preparation stops
automatically.
To ensure that the Professional Cappuccino
Frother works perfectly, it should be rinsed
and cleaned regularly (refer to Chapter 4
‘Maintenance – Professional Cappuccino
Frother’).
T
E
T
de
fr
it
en
it
Summary of Contents for ENA 5
Page 5: ...5 ENA 5 de fr it en it ...
