19
2 Preparation
You can adjust the grinder to suit the degree of roast of your coffee.
If you adjust the consistency of grind when the grinder is not
operating, the grinder adjustment switch could be damaged.
T
Only adjust the consistency of grind when the grinder is
running.
The consistency of grind is correct if the coffee flows regularly from
the coffee spout. In addition a fine, thick crema forms.
Example:
Proceed as follows to change the consistency of grind
during
the preparation of an espresso.
T
Place a cup under the coffee spout.
T
Open the bean container cover and remove the aroma
preservation cover.
T
Turn the Rotary Switch until
ESPRESSO
is displayed.
T
Press the Rotary Switch to start preparation.
T
Turn the grinder adjustment switch to the desired position
while
the grinder is running.
The preset amount of water flows into the cup. Preparation
stops automatically.
There is a danger of scalding from hot water splashes.
T
Avoid direct contact with the skin.
Example:
Proceed as follows to prepare hot water.
Precondition:
CAPPUCC.
is displayed (example).
T
Place a cup under the fine foam frother.
T
Turn the switch to the
m
position.
WATER
, water flows out of the fine foam frother.
Preparation stops automatically when the preset amount of
water is reached.
T
Turn the switch to the
°
position.
CAPPUCC.
appears on the display (example).
Adjusting the grinder
NOTICE
Hot water
J
CAUTION
Summary of Contents for D6
Page 43: ...43 ...
