34
5 Maintenance
E
If the descaling agent comes into contact with sensitive
surfaces (e.g. marble), damage cannot be ruled out. Clean up
any splashes immediately.
Precondition:
DESCALE
/
CAPPUCC.
is displayed (example).
T
Touch the Maintenance symbol
c
for
approximately
2 seconds.
EMPTY TRAY
appears on the display.
T
Empty the drip tray and coffee grounds container and put
them back into the machine.
AGENT IN TANK
T
Remove and empty the water tank.
T
Completely dissolve 3 JURA descaling tablets in a receptacle
holding 17 oz (500 ml) of water. This may take several
minutes.
T
Pour the solution into the
empty
water tank and insert it
into the machine.
OPEN SWITCH
, the light segment on the switch lights up.
T
Place a receptacle under the fine foam frother.
T
Turn the switch to the
m
position.
DESCALE
appears and water flows out of the fine foam
frother repeatedly. The Maintenance symbol
c
flashes
during the descaling operation.
The operation is interrupted,
CLOSE SWITCH
.
T
Turn the switch to the
°
position.
DESCALE
. The descaling operation is continued.
The operation is interrupted,
EMPTY TRAY
.
T
Empty the drip tray and coffee grounds container and put
them back into the machine.
FILL TANK
T
Empty the receptacle and place it under the coffee spout
and fine foam frother.
T
Remove the water tank and rinse it thoroughly.
T
Fill the water tank with fresh, cold water and reinsert the
tank.
OPEN SWITCH
, the light segment on the switch lights up.
T
Turn the switch to the
m
position.
DESCALE
The operation is interrupted,
CLOSE SWITCH
.
Summary of Contents for D6
Page 43: ...43 ...
